cutting discs – Fours Wire for advanced industries co.

Cutting & Grinding Discs — Fours

TOP DISC

PERFECT

CUTTING

GRINDING

THIN CUTTING — TYPE 1 / TYPE 41 (FLAT CENTER)

STANDARD — Normal Metal / DIY / Economical PRO — Inox / Stainless Steel / Fast Cool / Fe+S+CI <0.1% XP — High Tensile Alloy / Very Hard Alloy / Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	0.45″ — 1 mm	5/8″ — 16 mm	15200	A60T (FS-100-4-10 st.)	WA60T (FS-100-4pro)	Z60T (FS-100-4xp)
4½” — 115 mm	0.45″ — 1 mm	7/8″ — 22.2 mm	13300	A60T (FS-115-4.5 st.)	WA60T (FS-115-4.5pro)	Z60T (FS-115-4.5xp)
5″ — 125 mm	0.54″ — 1.2 mm	7/8″ — 22.2 mm	12200	A60T (FS-125-5 st.)	WA60T (FS-125-5pro)	Z60T (FS-125-5xp)
7″ — 180 mm	0.62″ — 1.6 mm	7/8″ — 22.2 mm	8700	A46T (FS-180-7 st.)	WA46T (FS-180-7pro)	Z46T (FS-180-7xp)
9″ — 230 mm	0.8″ — 1.9 mm	7/8″ — 22.2 mm	6600	A36T (FS-230-9 st.)	WA36T (FS-230-9pro)	Z36T (FS-230-9xp)

GENERAL CUTTING — TYPE 1 / TYPE 41 (FLAT CENTER)

STANDARD PRO — Fe+S+CI <0.1% XP — Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	0.8″ — 2 mm	5/8″ — 16 mm	15200	A46S (FS-100-4-20 st.)	WA46T (FS-100-4-20 pr.)	Z46T (FS-100-4-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-100-4-25 st.)	WA36T (FS-100-4-25 pr.)	Z36T (FS-100-4-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-100-4-32 st.)	WA30T (FS-100-4-32 pr.)	Z30T (FS-100-4-32 xp.)
4½” — 115 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	13300	A46S (FS-115-4.5-20 st.)	WA46T (FS-115-4.5-20 pr.)	Z46T (FS-115-4.5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-115-4.5-25 st.)	WA36T (FS-115-4.5-25 pr.)	Z36T (FS-115-4.5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-115-4.5-32 st.)	WA30T (FS-115-4.5-32 pr.)	Z30T (FS-115-4.5-32 xp.)
5″ — 125 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	12200	A46S (FS-125-5-20 st.)	WA46T (FS-125-5-20 pr.)	Z46T (FS-125-5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-125-5-25 st.)	WA36T (FS-125-5-25 pr.)	Z36T (FS-125-5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-125-5-32 st.)	WA30T (FS-125-5-32 pr.)	Z30T (FS-125-5-32 xp.)
7″ — 180 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	8700	A46S (FS-180-7-20 st.)	WA46T (FS-180-7-20 pr.)	Z46T (FS-180-7-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-180-7-25 st.)	WA36T (FS-180-7-25 pr.)	Z36T (FS-180-7-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-180-7-32 st.)	WA30T (FS-180-7-32 pr.)	Z30T (FS-180-7-32 xp.)
9″ — 230 mm	3/32″ — 2.5 mm	7/8″ — 22.2 mm	6600	A36S (FS-230-9-25 st.)	WA36T (FS-230-9-25 pr.)	Z36T (FS-230-9-25 xp.)
9″ — 230 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	6600	A30S (FS-230-9-32 st.)	WA30T (FS-230-9-32 pr.)	Z30T (FS-230-9-32 xp.)

GENERAL CUTTING — TYPE 42 (DEPRESSED CENTER)

STANDARD PRO — Fe+S+CI <0.1% XP — Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	0.8″ — 2 mm	5/8″ — 16 mm	15200	A46S (FS-100-4-20 st.)	WA46T (FS-100-4-20 pr.)	Z46T (FS-100-4-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-100-4-25 st.)	WA36T (FS-100-4-25 pr.)	Z36T (FS-100-4-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-100-4-32 st.)	WA30T (FS-100-4-32 pr.)	Z30T (FS-100-4-32 xp.)
4½” — 115 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	13300	A46S (FS-115-4.5-20 st.)	WA46T (FS-115-4.5-20 pr.)	Z46T (FS-115-4.5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-115-4.5-25 st.)	WA36T (FS-115-4.5-25 pr.)	Z36T (FS-115-4.5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-115-4.5-32 st.)	WA30T (FS-115-4.5-32 pr.)	Z30T (FS-115-4.5-32 xp.)
5″ — 125 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	12200	A46S (FS-125-5-20 st.)	WA46T (FS-125-5-20 pr.)	Z46T (FS-125-5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-125-5-25 st.)	WA36T (FS-125-5-25 pr.)	Z36T (FS-125-5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-125-5-32 st.)	WA30T (FS-125-5-32 pr.)	Z30T (FS-125-5-32 xp.)
7″ — 180 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	8700	A46S (FS-180-7-20 st.)	WA46T (FS-180-7-20 pr.)	Z46T (FS-180-7-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-180-7-25 st.)	WA36T (FS-180-7-25 pr.)	Z36T (FS-180-7-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-180-7-32 st.)	WA30T (FS-180-7-32 pr.)	Z30T (FS-180-7-32 xp.)
9″ — 230 mm	3/32″ — 2.5 mm	7/8″ — 22.2 mm	6600	A36S (FS-230-9-25 st.)	WA36T (FS-230-9-25 pr.)	Z36T (FS-230-9-25 xp.)
9″ — 230 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	6600	A30S (FS-230-9-32 st.)	WA30T (FS-230-9-32 pr.)	Z30T (FS-230-9-32 xp.)

CHOP & STATIONARY SAWS — TYPE 1 / TYPE 41

STANDARD — Normal Metal PRO — Inox / Stainless

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code
10″ — 250 mm	1/8″ — 3.2 mm	1″ — 25.4/20 mm	6100	A30R (FS-250-10-32 st.)	WA30S (FS-250-10-32pro)
12″ — 300 mm	1/8″ — 3.2 mm	1″ — 25.4/20 mm	5100	A30R (FS-300-12-32 st.)	WA30S (FS-300-12-32pro)
14″ — 350 mm	5/32″ — 3.9 mm	1″ — 25.4/32 mm	4400	A30R (FS-350-14-39 st.)	WA30S (FS-350-14-39pro)
16″ — 400 mm	5/32″ — 3.9 mm	1″ — 25.4/32 mm	3850	A30R (FS-400-16-39 st.)	WA30S (FS-400-16-39pro)

HIGH SPEED GAS POWERED SAWS — RAILWAY (TYPE 1 / TYPE 41)

PRO

Dia	Thickness	Hole	Max RPM	PRO Code
12″ — 300 mm	5/32″ — 3.9 mm	1″ — 25.4 mm	6300	ZA24R (FS-300-12-39pro)
14″ — 350 mm	5/32″ — 3.9 mm	1″ — 25.4 mm	5500	ZA24R (FS-350-14-39pro)
16″ — 400 mm	5/32″ — 3.9 mm	1″ — 25.4 mm	4800	ZA24R (FS-400-16-39pro)

CONCRETE / MASONRY / CAST IRON — CUTTING (TI 41 / TI 42)

PRO

Dia	Thickness	Hole	Max RPM	PRO Code
4½” — 115 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	13300	AC30R (FS-114-4.5-32 pro)
5″ — 125 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	12200	AC30R (FS-125-5-32 pro)
7″ — 180 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	8700	AC30R (FS-180-7-32 pro)
9″ — 230 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	6600	AC30R (FS-230-9-32 pro)

GENERAL GRINDING — TYPE 27 (DEPRESSED CENTER)

STANDARD — Normal Metal / DIY / Economical PRO — Inox / Stainless / Fast Cool / Fe+S+CI <0.1% XP — High Tensile Alloy / Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	1/4″ — 6.4 mm	5/8″ — 16 mm	15200	A24R (FS-100-4-64 st.)	WA24R (FS-100-4-64 pr.)	Z24R (FS-100-4-64 xp.)
	8/25″ — 8 mm			A24R (FS-100-4-80 st.)	WA24R (FS-100-4-80 pr.)	Z24R (FS-100-4-80 xp.)
	2/25″ — 10 mm			A24R (FS-100-4-10 st.)	WA24R (FS-100-4-10 pr.)	Z24R (FS-100-4-10 xp.)
4½” — 115 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	13300	A24R (FS-115-4.5-64 st.)	WA24R (FS-115-4.5-64 pr.)	Z24R (FS-115-4.5-64 xp.)
	8/25″ — 8 mm			A24R (FS-115-4.5-80 st.)	WA24R (FS-115-4.5-80 pr.)	Z24R (FS-115-4.5-80 xp.)
	2/25″ — 10 mm			A24R (FS-115-4.5-10 st.)	WA24R (FS-115-4.5-10 pr.)	Z24R (FS-115-4.5-10 xp.)
5″ — 125 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	12200	A24R (FS-125-5-64 st.)	WA24R (FS-125-5-64 pr.)	Z24R (FS-125-5-64 xp.)
	8/25″ — 8 mm			A24R (FS-125-5-80 st.)	WA24R (FS-125-5-80 pr.)	Z24R (FS-125-5-80 xp.)
	2/25″ — 10 mm			A24R (FS-125-5-10 st.)	WA24R (FS-125-5-10 pr.)	Z24R (FS-125-5-10 xp.)
7″ — 180 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	8700	A24R (FS-180-7-64 st.)	WA24R (FS-180-7-64 pr.)	Z24R (FS-180-7-64 xp.)
	8/25″ — 8 mm			A24R (FS-180-7-80 st.)	WA24R (FS-180-7-80 pr.)	Z24R (FS-180-7-80 xp.)
	2/25″ — 10 mm			A24R (FS-180-7-10 st.)	WA24R (FS-180-7-10 pr.)	Z24R (FS-180-7-10 xp.)
9″ — 230 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	6600	A24R (FS-230-9-64 st.)	WA24R (FS-230-9-64 pr.)	Z24R (FS-230-9-64 xp.)
	8/25″ — 8 mm			A24R (FS-230-9-80 st.)	WA24R (FS-230-9-80 pr.)	Z24R (FS-230-9-80 xp.)
	2/25″ — 10 mm			A24R (FS-230-9-10 st.)	WA24R (FS-230-9-10 pr.)	Z24R (FS-230-9-10 xp.)

CONCRETE / MASONRY / CAST IRON — GRINDING (TI 27)

PRO — 30°

Dia	Thickness	Hole	Max RPM	PRO Code
4½” — 115 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	13300	AC24R (FS-114-4.5-32 pro)
5″ — 125 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	12200	AC24R (FS-125-5-32 pro)
7″ — 180 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	8700	AC24R (FS-180-7-32 pro)
9″ — 230 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	6600	AC30R (FS-230-9-32 pro)

CUTTING

GRINDING

THIN CUTTING — TYPE 1 / TYPE 41 (FLAT CENTER)

STANDARD — Normal Metal / DIY / Economical PRO — Inox / Stainless Steel / Fast Cool / Fe+S+CI <0.1% XP — High Tensile Alloy / Very Hard Alloy / Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	0.45″ — 1 mm	5/8″ — 16 mm	15200	A60T (FS-100-4-10 st.)	WA60T (FS-100-4pro)	Z60T (FS-100-4xp)
4½” — 115 mm	0.45″ — 1 mm	7/8″ — 22.2 mm	13300	A60T (FS-115-4.5 st.)	WA60T (FS-115-4.5pro)	Z60T (FS-115-4.5xp)
5″ — 125 mm	0.54″ — 1.2 mm	7/8″ — 22.2 mm	12200	A60T (FS-125-5 st.)	WA60T (FS-125-5pro)	Z60T (FS-125-5xp)
7″ — 180 mm	0.62″ — 1.6 mm	7/8″ — 22.2 mm	8700	A46T (FS-180-7 st.)	WA46T (FS-180-7pro)	Z46T (FS-180-7xp)
9″ — 230 mm	0.8″ — 1.9 mm	7/8″ — 22.2 mm	6600	A36T (FS-230-9 st.)	WA36T (FS-230-9pro)	Z36T (FS-230-9xp)

GENERAL CUTTING — TYPE 1 / TYPE 41 (FLAT CENTER)

STANDARD PRO — Fe+S+CI <0.1% XP — Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	0.8″ — 2 mm	5/8″ — 16 mm	15200	A46S (FS-100-4-20 st.)	WA46T (FS-100-4-20 pr.)	Z46T (FS-100-4-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-100-4-25 st.)	WA36T (FS-100-4-25 pr.)	Z36T (FS-100-4-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-100-4-32 st.)	WA30T (FS-100-4-32 pr.)	Z30T (FS-100-4-32 xp.)
4½” — 115 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	13300	A46S (FS-115-4.5-20 st.)	WA46T (FS-115-4.5-20 pr.)	Z46T (FS-115-4.5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-115-4.5-25 st.)	WA36T (FS-115-4.5-25 pr.)	Z36T (FS-115-4.5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-115-4.5-32 st.)	WA30T (FS-115-4.5-32 pr.)	Z30T (FS-115-4.5-32 xp.)
5″ — 125 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	12200	A46S (FS-125-5-20 st.)	WA46T (FS-125-5-20 pr.)	Z46T (FS-125-5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-125-5-25 st.)	WA36T (FS-125-5-25 pr.)	Z36T (FS-125-5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-125-5-32 st.)	WA30T (FS-125-5-32 pr.)	Z30T (FS-125-5-32 xp.)
7″ — 180 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	8700	A46S (FS-180-7-20 st.)	WA46T (FS-180-7-20 pr.)	Z46T (FS-180-7-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-180-7-25 st.)	WA36T (FS-180-7-25 pr.)	Z36T (FS-180-7-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-180-7-32 st.)	WA30T (FS-180-7-32 pr.)	Z30T (FS-180-7-32 xp.)
9″ — 230 mm	3/32″ — 2.5 mm	7/8″ — 22.2 mm	6600	A36S (FS-230-9-25 st.)	WA36T (FS-230-9-25 pr.)	Z36T (FS-230-9-25 xp.)
9″ — 230 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	6600	A30S (FS-230-9-32 st.)	WA30T (FS-230-9-32 pr.)	Z30T (FS-230-9-32 xp.)

GENERAL CUTTING — TYPE 42 (DEPRESSED CENTER)

STANDARD PRO — Fe+S+CI <0.1% XP — Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	0.8″ — 2 mm	5/8″ — 16 mm	15200	A46S (FS-100-4-20 st.)	WA46T (FS-100-4-20 pr.)	Z46T (FS-100-4-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-100-4-25 st.)	WA36T (FS-100-4-25 pr.)	Z36T (FS-100-4-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-100-4-32 st.)	WA30T (FS-100-4-32 pr.)	Z30T (FS-100-4-32 xp.)
4½” — 115 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	13300	A46S (FS-115-4.5-20 st.)	WA46T (FS-115-4.5-20 pr.)	Z46T (FS-115-4.5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-115-4.5-25 st.)	WA36T (FS-115-4.5-25 pr.)	Z36T (FS-115-4.5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-115-4.5-32 st.)	WA30T (FS-115-4.5-32 pr.)	Z30T (FS-115-4.5-32 xp.)
5″ — 125 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	12200	A46S (FS-125-5-20 st.)	WA46T (FS-125-5-20 pr.)	Z46T (FS-125-5-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-125-5-25 st.)	WA36T (FS-125-5-25 pr.)	Z36T (FS-125-5-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-125-5-32 st.)	WA30T (FS-125-5-32 pr.)	Z30T (FS-125-5-32 xp.)
7″ — 180 mm	0.8″ — 2 mm	7/8″ — 22.2 mm	8700	A46S (FS-180-7-20 st.)	WA46T (FS-180-7-20 pr.)	Z46T (FS-180-7-20 xp.)
	3/32″ — 2.5 mm			A36S (FS-180-7-25 st.)	WA36T (FS-180-7-25 pr.)	Z36T (FS-180-7-25 xp.)
	1/8″ — 3.2 mm			A30S (FS-180-7-32 st.)	WA30T (FS-180-7-32 pr.)	Z30T (FS-180-7-32 xp.)
9″ — 230 mm	3/32″ — 2.5 mm	7/8″ — 22.2 mm	6600	A36S (FS-230-9-25 st.)	WA36T (FS-230-9-25 pr.)	Z36T (FS-230-9-25 xp.)
9″ — 230 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	6600	A30S (FS-230-9-32 st.)	WA30T (FS-230-9-32 pr.)	Z30T (FS-230-9-32 xp.)

CHOP & STATIONARY SAWS — TYPE 1 / TYPE 41

STANDARD PRO — Inox / Stainless

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code
10″ — 250 mm	1/8″ — 3.2 mm	1″ — 25.4/20 mm	6100	A30R (FS-250-10-32 st.)	WA30S (FS-250-10-32pro)
12″ — 300 mm	1/8″ — 3.2 mm	1″ — 25.4/20 mm	5100	A30R (FS-300-12-32 st.)	WA30S (FS-300-12-32pro)
14″ — 350 mm	5/32″ — 3.9 mm	1″ — 25.4/32 mm	4400	A30R (FS-350-14-39 st.)	WA30S (FS-350-14-39pro)
16″ — 400 mm	5/32″ — 3.9 mm	1″ — 25.4/32 mm	3850	A30R (FS-400-16-39 st.)	WA30S (FS-400-16-39pro)

HIGH SPEED GAS POWERED SAWS — RAILWAY (TYPE 1 / TYPE 41)

PRO

Dia	Thickness	Hole	Max RPM	PRO Code
12″ — 300 mm	5/32″ — 3.9 mm	1″ — 25.4 mm	6300	ZA24R (FS-300-12-39pro)
14″ — 350 mm	5/32″ — 3.9 mm	1″ — 25.4 mm	5500	ZA24R (FS-350-14-39pro)
16″ — 400 mm	5/32″ — 3.9 mm	1″ — 25.4 mm	4800	ZA24R (FS-400-16-39pro)

CONCRETE / MASONRY / CAST IRON — CUTTING (TI 41 / TI 42)

PRO

Dia	Thickness	Hole	Max RPM	PRO Code
4½” — 115 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	13300	AC30R (FS-114-4.5-32 pro)
5″ — 125 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	12200	AC30R (FS-125-5-32 pro)
7″ — 180 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	8700	AC30R (FS-180-7-32 pro)
9″ — 230 mm	1/8″ — 3.2 mm	7/8″ — 22.2 mm	6600	AC30R (FS-230-9-32 pro)

GENERAL GRINDING — TYPE 27 (DEPRESSED CENTER)

STANDARD — Normal Metal / DIY / Economical PRO — Inox / Stainless / Fast Cool / Fe+S+CI <0.1% XP — High Tensile Alloy / Fe+S+CI <0.1%

Dia	Thickness	Hole	Max RPM	STANDARD Code	PRO Code	XP Code
4″ — 100 mm	1/4″ — 6.4 mm	5/8″ — 16 mm	15200	A24R (FS-100-4-64 st.)	WA24R (FS-100-4-64 pr.)	Z24R (FS-100-4-64 xp.)
	8/25″ — 8 mm			A24R (FS-100-4-80 st.)	WA24R (FS-100-4-80 pr.)	Z24R (FS-100-4-80 xp.)
	2/25″ — 10 mm			A24R (FS-100-4-10 st.)	WA24R (FS-100-4-10 pr.)	Z24R (FS-100-4-10 xp.)
4½” — 115 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	13300	A24R (FS-115-4.5-64 st.)	WA24R (FS-115-4.5-64 pr.)	Z24R (FS-115-4.5-64 xp.)
	8/25″ — 8 mm			A24R (FS-115-4.5-80 st.)	WA24R (FS-115-4.5-80 pr.)	Z24R (FS-115-4.5-80 xp.)
	2/25″ — 10 mm			A24R (FS-115-4.5-10 st.)	WA24R (FS-115-4.5-10 pr.)	Z24R (FS-115-4.5-10 xp.)
5″ — 125 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	12200	A24R (FS-125-5-64 st.)	WA24R (FS-125-5-64 pr.)	Z24R (FS-125-5-64 xp.)
	8/25″ — 8 mm			A24R (FS-125-5-80 st.)	WA24R (FS-125-5-80 pr.)	Z24R (FS-125-5-80 xp.)
	2/25″ — 10 mm			A24R (FS-125-5-10 st.)	WA24R (FS-125-5-10 pr.)	Z24R (FS-125-5-10 xp.)
7″ — 180 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	8700	A24R (FS-180-7-64 st.)	WA24R (FS-180-7-64 pr.)	Z24R (FS-180-7-64 xp.)
	8/25″ — 8 mm			A24R (FS-180-7-80 st.)	WA24R (FS-180-7-80 pr.)	Z24R (FS-180-7-80 xp.)
	2/25″ — 10 mm			A24R (FS-180-7-10 st.)	WA24R (FS-180-7-10 pr.)	Z24R (FS-180-7-10 xp.)
9″ — 230 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	6600	A24R (FS-230-9-64 st.)	WA24R (FS-230-9-64 pr.)	Z24R (FS-230-9-64 xp.)
	8/25″ — 8 mm			A24R (FS-230-9-80 st.)	WA24R (FS-230-9-80 pr.)	Z24R (FS-230-9-80 xp.)
	2/25″ — 10 mm			A24R (FS-230-9-10 st.)	WA24R (FS-230-9-10 pr.)	Z24R (FS-230-9-10 xp.)

CONCRETE / MASONRY / CAST IRON — GRINDING (TI 27)

PRO — 30°

Dia	Thickness	Hole	Max RPM	PRO Code
4½” — 115 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	13300	AC24R (FS-114-4.5-32 pro)
5″ — 125 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	12200	AC24R (FS-125-5-32 pro)
7″ — 180 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	8700	AC24R (FS-180-7-32 pro)
9″ — 230 mm	1/4″ — 6.4 mm	7/8″ — 22.2 mm	6600	AC30R (FS-230-9-32 pro)

INDEX — Abrasive & Bond Type Reference

Symbol	Abrasive Type	Symbol	Bond Type
A	Aluminum Oxide	B	Resinoid
C	Silicon Carbide	BF	Resinoid Reinforced
Z	Alumina Zirconium	E	Shellac
WA / AA	White Aluminum Oxide	O	Oxychloride
		R	Rubber
		S	Silicate
		V	Vitrified

Maximum Operating Speed — Color Code

Speed	Label Color
50 m/s	Blue
60 m/s	Yellow
80 m/s	Red
100 m/s	Green
125 m/s	Blue / Yellow

أقراص القطع

Top Disc & Perfect — Abrasive Discs

Welding Machines: Advanced Solutions for Every Need.

Authorized Agent for the DCA Products.

وكيل معتمد لمنتجات DCA